Compressed Air Drain Trap
The VALMERU VAT10 is a float-type Compressed Air Drain Trap, commonly referred to as an Air Trap, designed to automatically remove condensate from compressed-air and gas systems while minimizing air loss. It continuously removes moisture and oil condensate while maintaining a permanent liquid seal designed to minimize compressed-air loss, delivering reliable drainage under continuous pressure.
DESCRIPTION
Meticulously designed around an innovative float-in-cage structure, VAT10 helps isolate the operating float from line turbulence and contaminants. Its debris-resistant configuration, integral strainer and maintainable construction provide maximum operational reliability for demanding compressed-air and gas utility service.
BENEFITS
- Float-in-Cage Body & Permanent Liquid Seal Design
- Debris-Resistant & Contaminant-Tolerant Structure
- All-in-One Compressed Air Condensate Control
- Integral Strainer & Easy In-Line Maintenance
- Minimized Air Loss & Energy-Efficient Sealing
- Prevention of Moisture Carryover & Line Corrosion
SPECIFICATIONS
- Orifice : 0.7 mm ~ 5 mm (differential pressure class dependent)
- Body Size : 1/2 inch (DN15) ~ 2 inch (DN50)
- Connection : 1/2 inch (DN15) ~ 2 inch (DN50)
- NPT, Socket Weld, ANSI flange connection is available.
MATERIALS
| No. | Description | Spec. 1 | Spec. 2 | Spec. 3 |
|---|---|---|---|---|
| 1 | Body | A216-WCB | A351-CF8M | A890-4A |
| 2 | Cover | A216-WCB | A351-CF8M | A890-4A |
| 3 | Float | A240-316 | A240-316 | S31803 |
| 4 | Gasket | GRAFOIL | GRAFOIL | GRAFOIL |
| 5 | Bolt | A193-B7 / A194-2H | A193-B8M / A194-8M | STS 316(Xylar-2) |
| Bronze, Super Duplex series can available on request. | ||||
VAT10 – FLOAT-TYPE DRAIN TRAP for COMPRESSED AIR & GAS FAQ
Is VAT10 intended only for compressed air, or can it also be considered for gas service?
VAT10 is a float-type drain trap intended for condensate removal in compressed-air and gas systems. Final suitability should be checked against the actual fluid, pressure, temperature and material requirements of the project.
What size, orifice and connection options are available for VAT10?
VAT10 provides orifices from 0.7 mm to 5 mm depending on differential-pressure class, with body and connection sizes from 1/2 inch (DN15) to 2 inch (DN50). NPT, Socket Weld and ANSI flange connections are available.
What material options are available for VAT10?
The listed body material options include A216-WCB, A351-CF8M and A890-4A. Bronze and Super Duplex series are also available on request.
What information is useful for selecting or quoting VAT10?
It is helpful to provide the operating and differential pressure, expected condensate load, fluid or gas service, connection size and type, and material requirements.